low profile rivet gun
Deal Score0
Deal Score0
Best results for low profile rivet gun
Newborn 930-GTD Drip-Free Smooth Hex Rod Cradle Caulking Gun with Gator Trigger Comfort Grip, 1/10 Gallon Cartridge, 10:1 Thrust Ratio
$8.99
$12.50
Last update was on: May 1, 2024 8:41 pm
- N/A
- Imported
- Steel half-barrel (also called cradle) frame caulking gun for 1/10-gal. cartridges
- Thrust ratio of 10:1 for use with low viscosity materials
- Smooth pressure rod requires less force and is quieter than a ratchet-style pressure rod
- Rod retracts after each pull of the trigger to help prevent dripping
Concealed Carry Fobus Holster Makarov Paddle Elite Concealed Securely Case HandGun & Pistol Pouch
$28.00
$34.72
Last update was on: May 1, 2024 8:41 pm
- Fobus Holster Makarov Paddle Elite Concealed Securely Case
- Fobus Holster Makarov
- Low profile design for concealment. Passive retention around trigger guard Allows for rapid presentation, yet securely locks handgun in place. Rubberized paddle provides extra stability and increased comfort. Steel reinforced rivet attachment system (paddle and holster).
- Established more than 25 years ago, FOBUSTM is Israel's largest manufacturer of holsters and accessories for small arms. FOBUSTM holsters and pouches were designed and made especially for the Israeli security services and SWAT teams.
Scotty #440-BK Low Profile Track
OX Tools Four Piece Construction Rig | Outback Leather
$139.99
$184.79
Last update was on: May 1, 2024 8:41 pm
- 22 tool holders and pocket layout for perfect rhythm
- Heavy-duty rivet reinforcement on all major stress points provides added strength, durability, and tear-resistance
- Top grain oil-tanned 'saddle' leather enhances feel and softness
- 3” wide leather tool belt
- Fits waist size 29”-46”
Pop Rivets 1/4" x 3/8" All Steel Dome Head Blind 8-6 Gap .251" – .375" Quantity 25 by Fastenere
$11.19
$15.11
Last update was on: May 1, 2024 8:41 pm
- Dome head is the most commonly specified rivet head style because of its low profile and clean finished appearance. It is slightly rounded and twice as wide as the rivet body diameter.
- Made of low carbon steel and should be used when fastening materials of similar mechanical and physical properties.
- The steel mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. The steel mandrel gives this style of rivet greater tensile and shear values than aluminum rivets with aluminum mandrels.
Pop Rivets 1/4" x 3/4" Aluminum Body Steel Mandrel Dome Head Blind 8-12 Gap .626" – .750" Quantity 25 by Fastenere
$12.08
$15.95
Last update was on: May 1, 2024 8:41 pm
- Open end blind rivets are tubular rivets with a mandrel through the center. The entire rivet assembly is inserted into a hole drilled through the parts to be joined, and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and snaps off the mandrel.
- Dome head is the most commonly specified rivet head style because of its low profile and clean finished appearance. It is slightly rounded and twice as wide as the rivet body diameter.
PROSUN Fast Reload 2 Inch Tape Gun Dispenser Packing Packaging Sealing Cutter Yellow
$10.98
$15.15
Last update was on: May 1, 2024 8:41 pm
- ★Adaptive: Fits 2 inch wide tape, regular or thick tape, tape is NOT included
- ★Fast: Fast reload design helps you work efficiently
- ★Smooth: TWO ROLLERS design, keep the supply SMOOTH even when the tape is running low
- ★Extra Blade: One extra replacing blade is included, sharp and durable stainless steel blade
- ★Comfortable: Ergonomic design shape make your work comfortable
All-Clad 4114 Stainless Steel Tri-Ply Bonded Dishwasher Safe Fry Pan / Cookware, 14-Inch, Silver
$199.97
$281.96
Last update was on: May 1, 2024 8:41 pm
- 14-Inch fry pan with wide flat base and versatile low-profile shape
- 3-ply bonded construction consists of durable stainless steel encapsulating an aluminum core for even heating throughout
- Highly polished cooking surface with starburst finish offers stick resistance and easy maintenance, plus won’t react with food
- Contoured stainless-steel handles permanently secured with stainless-steel rivets
- capacity etched on base
CravenSpeed Platypus License Plate Mount for Fiat 124 Spider | 2017-2020 | No Drilling | Installs in Seconds | Made of Stainless Steel & Aluminum | Made in USA
$93.00
$109.74
Last update was on: May 1, 2024 8:41 pm
- ✔ IMPROVE THE LOOK OF YOUR FIAT: This is not a one size fits all. We tested hundreds of configurations on vehicle models to fit the exact model of your Fiat 124 Spider (2017-2020). The Platypus fits your bumper like it was meant to be there.
- ✔ EASY TO REMOVE: This updated version of the Platypus has a key-hole feature in the backplate that makes it very easy to remove without having to take your license plate off, leaving no trace that it was ever there.
YaeTek 86pcs Heavy Duty Blind Rivet Nut Kit Set, Riveter Tool, Rivet Nut Gun, Thread Hand Riveter, Rivet Gun Threaded Insert Tool, Riveting Tools with 80PCS Metric Rivet Nuts Assortment M3 M4 M5 M6 M8
$25.99
$36.91
Last update was on: May 1, 2024 8:41 pm
- Rivet nuts are made from aluminum alloy which provides strength, corrosion protection and long service life
- With open end, small flange, round hole, threaded inner wall and partial anti-skid surface, these flat head rivet nut has a good performance of fastener function
- There are various sizes, M3, M4, M5, M6, M8 and they normally have low profile compared to other nuts
- Each size includes many pieces of rivet nuts so you don't have to go to hardware store searching rivet nuts for a while
FreeTec M3-M8 Threaded Nut Rivet Insert Tool 86pcs Riveter Rivnut Nutsert Riveting Set
$27.75
$32.75
Last update was on: May 1, 2024 8:41 pm
- Rivet nuts are made from aluminum alloy which provides strength, corrosion protection and long service life
- With open end, small flange, round hole, threaded inner wall and partial anti-skid surface, these flat head rivet nut has a good performance of fastener function
- Suitable for repair work on cars, boats, furniture and machines
- There are various sizes, M3, M4, M5, M6, M8 and they normally have low profile compared to other nuts
Liangery Belt Keychain Leather Belt Loop Key Holder Belt Key Chain Clips with Detachable Keyring for Men
$12.98
$14.93
Last update was on: May 1, 2024 8:41 pm
- 【Perfect Gift Ideas for Men】: This mens belt key keyring is packed with luxury Liangery gift bag, it's great quality and a warm welcome belt loop keychain for men in all ages, not expensive but very luxury.It's a belt key ring for keys,everyone will be in need of them to hook keys,they are always purchased as Fathers day gift, Birthday gift,Wedding anniversary gift,Christmas gift,New Year Gift,Velentine's Day gift etc,every man will be happy and suprised to receive such a decent belt hook
Blade-Tech Total Eclipse Double Mag Pouch for Glock 43
Stainless Steel Pop Rivets 1/4" x 1/4" Dome Head Blind 8-4 Gap .126" – .250" Quantity 25 by Fastenere
$15.98
$22.05
Last update was on: May 1, 2024 8:41 pm
- Dome head is the most commonly specified rivet head style because of its low profile and clean finished appearance. It is slightly rounded and twice as wide as the rivet body diameter.
- Made of grade 305 stainless steel which provides excellent corrosion resistance. Stainless steel rivets should be used when fastening materials of similar mechanical and physical properties.
- The stainless steel mandrel is pulled into or against the rivet body, breaking at or near the junction of the mandrel shank and its upset end. Stainless steel rivets offer the Highest tensile, shear, and break load strengths of all rivet materials.
2-56 x 3/16" Button Head Socket Cap Screws, Allen Socket Drive, Black Oxide, Alloy Steel, Fully Threaded, Machine Thread, Quantity 100
RAILBLAZA Starport Hd
$14.99
$19.64
Last update was on: May 1, 2024 8:41 pm
- Practical replacement for preexisting external mount bases from Scotty, RAM, Cannon, Fish-On
- Rectangular, four-point installation base consistent with North American industry standard
- Compatible with the same hardware that is currently used to keep your base mounted to your kayak.
- Hardware needed to mount to kayak is included
- Hardware needed to mount to rail system is NOT included
Fobus Tactical GL-2 BH RT Standard Right Hand Roto Belt Conceal Carry Polymer Holster Glock – 17, 19, 22, 23, 34, 35-Black
$29.99
$41.69
Last update was on: May 1, 2024 8:41 pm
- Fobus Holster GL-2-BH RT Fits to: Glock - 17, 19, 22, 23, 34, 35
- Fobus Roto Belt Holsters: Developed in Israel for the world's military and special security services, the combat-proven Fobus Standard Holster series is a revolutionary step forward in holster design and technology
- Fobus Belt Hand Gun Holster Model GL-2-BH RT
- State of the art design, injection molding and space age high-density plastics are combined to create a holster which cannot be duplicated in leather or any other material
Fobus Conceal concealed carry Paddle Holster for Glock 29 30 39, 21SF, 30SF, 30S / Smith&Wesson 99 / Sigma series V only
$24.00
$26.40
Last update was on: May 1, 2024 8:41 pm
- Fits Glock 29, 30, 39, 21SF, 30SF, 30S / Smith&Wesson 99 / Sigma Series
- Low Profile Paddle Holster Right Handed. Passive Retention Allowing Rapid Presentation
- Rubberized Paddle for extra Stability
- Steel reinforced rivet attachment, 100% Lifetime Warranty
- Firearms remain firmly in holster
Fobus SP-11 LH Standard Left Hand Paddle Holster Springfield XD, XDM / HS 2000 / Taurus PT609, Titanum / Ruger P95
$20.09
$28.53
Last update was on: May 1, 2024 8:41 pm
- Fits Springfield XD, XDM / HS 2000 / Taurus PT609, Titanum / Ruger P95
- Low Profile Paddle Holster Left Handed. Passive Retention Allowing Rapid Presentation
- Rubberized Paddle for extra Stability
- Steel reinforced rivet attachment, 100% Lifetime Warranty
- For a Left Handed Shooter