homefixedtoday 
Best results for karcher pressure washer repair
Twinkle Star 1/4-Inch 50 FT Pressure Washer Hose 3000 PSI for Sun Joe SPX Series, Karcher, B&S, Craftsman, Generac, Champion&Simpson and Others
$22.99
$29.66
Amazon.com
Last update was on: June 18, 2024 5:14 pm
- Both End: 1/4 inches diameter, M22 Metric Female Fitting
- Working Pressure: Maximum to 3000 PSI, Max. Temperature: 140℉ / 60℃.
- Fits most pressure washer and Sun Joe brand pressure washer
- Extend your working range with our 50 ft extension hose
- With 12 months product warranty, if you have any questions, please contact us, we would be more than happy to assist.
1/4 IN. x 50 FT. Pressure Washer Hose Replacement for B & S, Craftsman, Generac & Karcher". The manufacturer is "Propulse" and the brand is "Propulse
$29.99
$41.99
Amazon.com
Last update was on: June 18, 2024 5:14 pm
- This Schieffer hose is Made in USA - Stamped on hose
- Fits many DeVilbiss, Excell, Generac/Briggs, Karcher & Ryobi Light duty units with dual 22mm-14 female twist connects
- 3,000 PSI working pressure
- 1/4" ID x 50' long - Ends: (2) 22mm-14 Female twist connect
Homelite Universal POWER PRESSURE WASHER WATER PUMP 2800 psi 2.5 gpm fits MANY MODELS 308653052
AAA Technologies Triplex Plunger Pump Kit 3200 PSI at 2.8 GPM
$202.49
$285.51
Amazon.com
Last update was on: June 18, 2024 5:14 pm
- 3200 psi at 2. 8 GPM
- Power boost technology
- Fully adjustable unloader system with ergonomic control
- Sight glass and advanced oil seal technology, does away with the need for a dipstick
- Thermal relief protection to prevent pump overheating
- Dual oversized radial ball bearing are installed for better wear, friction resistance and precision polished stainless Steel Pistons for extended seal life
B & S, Craftsman & Generac replacement pressure washer hose – Made in USA
$20.97
$25.58
Amazon.com
Last update was on: June 18, 2024 5:14 pm
- This Schieffer hose is Made in USA - Stamped on hose
- Also Fits Delta, Excell, Generac, Karcher, Ryobi & Troy Built light duty units
- Direct Replacement for these part #s B5642GS, B5693GS, 100512GS, 190249GS
- 3,000 PSI working pressure
- 1/4" ID x 25' long - Ends: (2) 22mm-14 Female twist connect
Briggs & Stratton 6188 Pressure Washer Replacement Hose, 30-Feet
$27.99
$32.47
Amazon.com
Last update was on: June 18, 2024 5:14 pm
- Replaces worn or damaged hoses
- For use with cold-water pressure washers up to 3,000 PSI
- Equipped with a Dual O-Ring Sealing System, the 6188 replacement hose will remain secure on your device
- 30-foot hose connects to male M22 pump and spray gun fittings, making it compatible with most brands of pressure washers
- Genuine OEM replacement part
Tool Daily Compatible Chemical Injector Set for Pressure Washer, Replacement for Briggs and Stratton 190593GS 190635GS 203640GS
$9.99
$14.49
Amazon.com
Last update was on: June 18, 2024 5:14 pm
- Pressure Washer Soap Injector Kit, compatible Briggs & Stratton Pump 190593GS, 190635GS and 203640GS. Please identify the part number of pressure washer pump, then check if it fits your pressure washer.
- 1/8’’ -27 male BSP thread.
- How to replace: Follow soap hose to end and you'll find injector. Take off soap hose. Use wrench to remove old injector. Clean out any gunk or dried soap in receptacle. Make sure rubber o ring is on injector as pictured. Put ball bearing inside injector and then the spring with small end of spring against the ball bearing. Insert injector into receptacle and tighten injector with 13mm wrench. Don't overtighten, you'll break the o ring or crack white metal on pump. Put the soap hose back on.
Tool Daily Pressure Washer Extension Wand, 90 Inch Power Washer Lance, 1/4’’ Quick Connect, M22, 4000 PSI
$23.99
$32.63
Amazon.com
Last update was on: June 18, 2024 5:14 pm
- Adjustable replacement extension lance for power washer. Total length: 90 Inch.
- Adjust the length of wand based on your application. The length of every part is 15 inch. 6 pieces of wands are included.
- The extension wand connects to pressure washer spray gun by M22 male thread or 1/4’’ quick connect plug. The wand has M22 14mm male thread end and it can change to 1/4’’ quick connect with included coupler.
