homefixedtoday 
Best results for glass door lock hardware
Rockwell Charlotte Sliding Door Handle in Black Finish fits 3-15/16 inchCTC Screwholes on door with a Mortise lock(not included) application up to 1-3/4 inch thick sliding patio door.
$56.97
$82.61
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Non-Handed, compatible on doors with a mortise lock application.
- Up to 1-3/4"" sliding door thickness
- Projection - 1.91" with good finger clearance
- Fits 3 or 4 hole mounts with 3-15/16" CTC Screwhole spacing
- Contains 1 outside + inside pull, thumblatch, installation fasteners (mortise lock not included)
Rockwell Sliding Patio Door Mortise Lock Surface Mount with Faceplate for Sliding glass doors, French doors, door hardware
Solid Brass Keyed Entry Multipoint Trim Set in Antique Black finish fits doors with a multipoint lock (multipoint lock non included)
$85.00
$116.45
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Solid Brass Trimset
- Finish: Antique Black
- Active Handle with keylocking cylinder
- Locking Cylinder - 5 pin SC1 Keyway
- Reversible, can be installed with handle above the locking cylinder or below the locking cylinder
- Screwhole to Screewhole center to center 7.717"
Rockwell Charlotte Offset Keylocking Sliding Door Handle with 3/4" Offset Keylock in White only fits 1-3/4 inch Thick Doors with a 4 Hole bore on The face of The Door.
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Sliding door handle with keylock in 3/4" offset from center position
- Non-Handed, compatible on doors with a mortise lock application
- Fits only 1-3/4" thick sliding door thickness
- Projection - 1.62"
- Fits 4 hole mounts with 3-15/16" screwhole to screwhole center hole spacing
- Package contains outside and inside pull with thumblatch and fasteners
Euro-Charlotte Sliding Glass Door Handle,in White Finish fits 3-15/16" Screwholes, Durable hardware door locks, up to 1-3/4" thick doors, door handles, door hardware
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Durable Die-Cast Hardware. Combination finger pull exterior and C handle interior
- Replaces wood pull handles on sliding doors with a mortised lock application.
- Non-Handed, compatible on doors with a mortise lock application.
- 2 pc construction Interior C handle. (Mortise lock not included), fits up to 1-3/4" thick doors, with 3-15/16 inch CTC screwholes
- Each package contains one outside and inside pull with thumblatch and installation fasteners
Rockwell Sonoma Sliding Door Handle Set in Antique Black Finish Fits 3-15/16" CTC Screw Holes, Durable Commercial & Residential, Door Hardware, Door Handles, Locks
Amazon.com
Last update was on: September 17, 2024 10:07 am
- This Sonoma Sliding Door Handle Set in Antique Black Finish Fits 3-15/16" CTC Screw holes is one of the most Durable door hardware pieces you can buy. It is made to last and manufactured at our high tech ISO 9000 certified facility
- Great Finish & Construction on this Sonoma Sliding Door Handle Set in Antique Black Finish Fits 3-15/16" CTC Screw holes is one of the most Durable door hardware pieces you can buy. It is made to last and manufactured at our high tech ISO 9000 certified facility
Rockwell Sonoma Sliding Glass Door Handle Set in White Finish with Center Keylock only fits 1-3/4" Thick Doors with 3 Hole Bore, Mortise Lock and Keeper Included
$59.99
$80.99
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Durable Zinc Die-Cast Hardware
- Non-Handed, compatible on doors with a mortise lock application
- Fits 3 hole door face mounts with 3-15/16" screwhole to screwhole center hole spacing
- Only works on 1-3/4" sliding door thickness
- Package contains outside and inside pull with thumblatch, fasteners, mortise lock & keeper
Center Position Keylocking Sonoma Sliding Door Handle in Brushed Nickel will only Fit 1-3/4" thick doors, with 3 hole door face bore and 3-15/16 inches CTC distance between the screwholes,
$69.99
$76.99
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Center Keylock sliding door handle fits 1-3/4" thick doors with 3 hole bore and 3-15/16" Screwholes ONLY
- Non-Handed, compatible on doors with a mortise lock application.
- Only fits 1-3/4" door thickness
- Handle Projection - 1.62"
- Fits 3 hole door face bore mounts with 3-15/16" CTC screwholes
- Package contains outside and inside pull with thumblatch, fasteners and 2 keys-mortise lock not included
Nightlock Security Lock Patio Sliding Door Barricade Dark Bronze
$33.95
$42.44
Amazon.com
Last update was on: September 17, 2024 10:07 am
- "Don't stay home without it!"
- Internet Shipping Box may be used instead of Clamshell Packaging
- Easy Installation! Minimal tools needed to install - drill, bit, and screwdriver!
- Made of Extruded Aluminum with Anodized Finish!
- For sliding door that is mounted on the "INSIDE" track of door unit
Oil Rubbed Bronze Pocket Sliding Door Hardware Privacy Handle Pull
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Includes integrated pull and side plates
- Ideal for sliding closet doors, this pocket allows you to smoothly open and close the door when needed
- Twist-knob lock allows you to use this for bathrooms or other rooms where privacy is desired
- Fits doors 1-3/8" to 1-3/4" thick - Reversible for left or right hand doors
- All standard installation parts included. Meets ANSI grade 3 specifications
Euro Sliding Glass Door Handle Kit – Keyed Lock (Tan)
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Almond/ Tan / Beige/ Cream
- 3 Keys Included
- Vinyl Universal Sliding Glass Door Handle Kit
- Replaces wood pull handles on sliding doors with a mortised lock application.
- Each package contains one outside and inside pull with thumblatch and installation fasteners
Patio Door Latch – Safe and Secure Drop-in Lock for Your Sliding Glass Doors, Patio Door Security Latch (Made in The USA) (Medium, White Powder Coat Finish)
Heavy Duty 12" Pull and Flush Barn Door Handle Set, Large Rustic Two-Side Design, for Gates Garages Sheds Furniture, Aluminum,Black Powder Coated Finish, Round
Amazon.com
Last update was on: September 17, 2024 10:07 am
- ✅Easy to install: YUANSHI Barn Door Handle set includes all of the necessary hardware to install on your door. Just drilling two holes in the door to combine the handle and finger pull with two screws.
- ✅Finger pull size: L 8 3/5 inch x W 2 3/8 inch x H 1/4 inch (depth 1/4 inch) Pull handle size: L 12 inch x H 2 3/4 inch Diameter of the pull handle is 1 inch.
- ✅Door panel thickness: 1/2 to 2 1/2 inch (if you want to use for a thicker door panel, you can buy some longer screw to match the door). If the Handle pillar is not tightened or needs to be removed, you could tighten it with the tiny wrench.
Sonoma Sliding Glass Door Handle, Durable hardware door locks, door handles, door hardware in Antique Brass Finish Fits 3-15/16"
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Durable Zinc Die-Cast Hardware
- Non-Handed, compatible on doors with a mortise lock application
- Up to 1-3/4"" sliding door thickness
- Projection - 1.909" with good finger clearance
- Fits 3 or 4 hole mounts with 3-15/16" screwhole to screwhole center hole spacing
- Package contains outside and inside pull with thumblatch and fasteners-mortise lock not included
Push Pull Paddle Handles : For Aluminum Store Front Doors : Mortise Style : Push To Right Position
Amazon.com
Last update was on: September 17, 2024 10:07 am
- ✅ ALWAYS KEEP CUSTOMERS COMING THROUGH YOUR DOORS - This Hard To Find Lock Hardware Includes All Door Positioning Modification instructions
- ✅ FITS MOST SWING NARROW STILE DOORS - Complete With Reversible (Left ~ Right) Cam Plug
- ✅ RELIABLE QUALITY REPLACEMENT HARDWARE - Operates Narrow Stile Latches Including Adams Rite, Sargent & Yale Lock Plus others
- ✅ COMMERCIAL GRADE 2 CERTIFIED DESIGN - Heavy Duty & Hardened Steel Internal Springs & Gears
Rockwell Charlotte Sliding Door Handle Set in a Brushed Chrome Finish fits 1.5 inch to 1-3/4 inch Doors with 3-15/16" CTC Screwholes
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Durable Hardware
- Non-Handed, compatible on doors with a mortise lock application.
- Up to 1-3/4" sliding door thickness
- Projection - 1.909" with good finger clearance
- Fits 3 or 4 hole mounts with 3-15/16"" screwhole to screwhole center hole spacing
- Each package contains one outside and inside pull with thumblatch and installation fasteners
STRONGAR Contemporary Sliding Barn Door Hardware For Wood/Polished Chrome Finish/Stainless Steel – Legacy WT Series (6′ Rail Length)
Mini Hinge for 1/4" Glass Shower Doors in Oil Rubbed Bronze Finish, Durable Commercial & Residential, Door Hardware, Door Handles, Locks
Amazon.com
Last update was on: September 17, 2024 10:07 am
- This Mini Hinge for 1/4" Glass Shower Doors in Oil Rubbed Bronze Finish is one of the most Durable door hardware pieces you can buy. It is made to last and manufactured at our high tech ISO 9000 certified facility
- Great Finish & Construction on this Mini Hinge for 1/4" Glass Shower Doors in Oil Rubbed Bronze Finish is one of the most Durable door hardware pieces you can buy. It is made to last and manufactured at our high tech ISO 9000 certified facility
Sliding Glass Patio Door Handle Set, Mortise Type, B-Position, Off Center Latch Keyed, White
Glass Door Lock Latch Rotary Knob Stainless Steel Glass Door Open/Close Home Hotel Bathroom
$9.60
$10.66
Amazon.com
Last update was on: September 17, 2024 10:07 am
- Brand new and high quality stainless steel glass door lock with aluminium alloy inner core.
- Suitable for 10~12mm thickness frameless glass door and tempered glass door.
- Made from stainless steel with brushed craft and shiny appearance, it is of strong strength and long durability.
- Solid round lock tongue controlled by rotary knob for easy opening and closing.
- Easy to install and use. Perfect for the use in home, hotel bathroom. A good replacement for the old or broken one.
